Hi All,

Here i m trying to install the ECC 6.0 SR3 (JAVA+ABAP and usage type MI, DI)  on Window 2K3 32 with Oracle 10.0.2. i am getting error

Test Logon to SAP System MDSD failed 
Solution: Make sure that the system is started, that the user DDIC exists and that the password of user DDIC is correct.

• on Step Check DDIC password when i try to logon with DDIC with password (that password which i give during installation and 19920607) then i got  SAP commit failed, session terminated.

How can i resolve it.

regards,

majamil

Hi

As an basis consultant if i get LIST_TOO_MANY_LPROS dump in ST22 what might be the reason, what action i have to take..

hi

  i am changing one program in my development server it asking access key

object type is  PROG

object name is MM13QF00

PROG ID R3TR

i have the OSS ID.

service place it asking TYPE . pls tell how to create access key

myserver is 4.7 ee

Hello, All

My NW ABAP BW and underlying Hana database are installed on separate machines rather than same machine.

In BW SM59 transaction, If I create RFC (TCP/IP Connection) to NW 7.3 BI Java portal, RFC connection failed with following error messages:

Error Details Error when opening an RFC connection (CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=67

Error Details ERROR: program IWDFVM4844_PORTAL_BIJ not registered

Error Details LOCATION: SAP-Gateway on host iwdfvm4844.wdf.sap.corp / sapgw00

Error Details DETAIL: TP IWDFVM4844_PORTAL_BIJ not registered

Error Details COMPONENT: SAP-Gateway

Error Details COUNTER: 357

Error Details MODULE: gwr3cpic.c

Error Details LINE: 1803

Error Details RETURN CODE: 679

Error Details SUBRC: 0

Error Details RELEASE: 720

Error Details TIME: Thu Jul 05 08:49:52 2012

Error Details VERSION: 2

I also checked "SMGW" goto -> logged on client, I can't find "TP IWDFVM4844_PORTAL_BIJ" registerred.  But  on my NW 7.3 BI Java portal, I have already registered the destination named “IWDFVM4844_PORTAL_BIJ”.

This issue doesn’t exist if I follow the same configuration steps to configure SM59 RFC (NW 7.3 ABAP -> NW 7.3 Java) on the BW with the underlying database on the same server.

I followed the following steps to finished configure RFC both on NW ABAP and Java ABAP.

NW Java 7.3  http://help.sap.com/saphelp_nw73/helpdata/en/4a/2c775cc16d47dbe10000000a42189c/frameset.htm

My Question:

In order to make the SM59 RFC (NW 7.3 ABAP -> NW 7.3 BI Java) works, is there any additional configuration necessary if NW BW and underlying database are on different server?

Thanks a lot!

Welkin

Dear All,

Currently we have ECC 6.0 with EHP4  running on Windows server 2003+ MicroSoft SQL server  2005 database with Kernel 701 .

Now i am confused while upgrading kernel 720

I already downloded the sapexe 720 &sapexdb 720 from service market place.

I read some where we need to download SAPHOSTAGENT FILE also it will replace exsiting saposcol ,any one explain me the usage of saphostagent and how it will replace earlier saposcol.

I know  the procedure of upgrading upto 701 kernel .but i am confusing kernel720 procedure.

Please suggest the procedure arre same or not kernel 701 and 720.

Thanks

Hi,

this is probably something easy to explain for all the experts out there:

I was asked by one of our developers the reason why he couldn't use the &SAP_EDIT command on some Z* tables.

When I tried it for myself, I could see that in fact the command couldn't be used with the table he asked me about but I could use it with some other Z* tables. He then told me he could do it until last monday but not now...

When comparing one table where I could use the &SAP_EDIT command with another where it wasn't possible, I couldn't find any differences on the table configurations.

Now, I have a couple of questions about this:

1. Where is this configured? What property should be changed so I can use the &SAP_EDIT command?

2. Is there a way to find out who (or what) changed the system's behavior when using the &SAP_EDIT command on this table?

Thanks,

Antonio

Hi

I have created a RFC with type T. When I am testing the same through SM59, I am getting error:

Logon     Connection Error

Error Details     Error when opening an RFC connection

Error Details     ERROR: program <program name>not registered

Error Details     LOCATION: SAP-Gateway on host xxxxxx / sapgw01

Error Details     DETAIL: TP <program name> not registered

Error Details     COMPONENT: SAP-Gateway

Error Details     COUNTER: 6268

Error Details     MODULE: gwr3cpic.c

Error Details     LINE: 1694

Error Details     RETURN CODE: 679

Error Details     SUBRC: 0

Error Details     RELEASE: 700

Error Details     TIME: Tue Jan 27 00:56:55 2009

Error Details     VERSION: 2

Can anybody help me in this?

Thanks in advance

Hi Netweaver Gurus,

I successfully installed Netweaver ABAP trial version. I can connect to Netweaver locally easily but when i try to connect the netweaver remotely via sapgui i get the following error:

partnet '141----

sapdp00' not reached

WSAEWOULDBLOCK: Resource temporarily unavailable

I tried to search the solution but failed.

Many thanks in advance for your help.

Baber

How to reset SAP logon password in IDES. If password is locked due to many failed attempts

Hi everyone,

I would like to get your opinion about starting my career in SAP. I am an Building Architect with no experience in IT or SAP. I enrolled to SAP Basis Netweaver Administration. My wife is an ABAP programmer and she thought me a little bit of ABAP and Security Administration. I am a bit familiar with SAP screens.

Do you think it would be easy for me to learn Basis by attending training? Is there any other way to learn it easily?

Thanks for your help.

Marlon R.

Hello all,

i am stucked at the Enter the location of the required software packages: Kernel NW 7.20! I tried to give it all media but no one is ok. It needs media with this label SAP:SAPLUP:700:*****.

Please help me if you know a media number , download location or another else solution.

Thank you

Best regard,

Beeekaa

Hi All,

We are facing ine issue in daily P2P load from SRM system to BW system. Many tRFCs are getting stuck red with message "Error when opening RFC connection". In SM21; we can see below error logs:

RD                                       Q0    I   Operating system call recv failed (error no. 104 )

RD                                       Q0    R Call of function GwRead failed, RC: -006

DIA  016 100 ALEREMOTE                E0  0 New System Log File Started with Number 18

DIA  016 100 ALEREMOTE                R4  9 Communication error, CPIC return code 017, SAP return code 239

DIA  016 100 ALEREMOTE                R6  4 > CPI-C function: CMINIT(SAP)

When I checked the RFC connection from SRM to BW system. It is behaving strangely. In 3,4 connections tests. It works fine. Then fails for next two with SAP gateway communication error. The local gateway is running. But sometimes it gives same error in SM58 that Local gateway not running. Below is the gateway trace

Fri Sep  7 04:14:41 2012
***LOG Q0I=> NiIRead: P=3.156.17.106:3300; L=3.156.9.64:36425: recv (104: Connection reset by peer) [nixxi.cpp 5087]
*** ERROR => NiIRead: SiRecv failed for hdl 129/sock 59
    (SI_ECONN_BROKEN/104; I4; ST; P=3.156.17.106:3300; L=3.156.9.64:36425) [nixxi.cpp    5087]

*****************************************************************************
*
*  LOCATION    SAP-Gateway on host ushaplp923la.nbcuni.ge.com / sapgw00
*  ERROR       read from SAP gateway failed
*
*  TIME        Fri Sep  7 04:14:41 2012
*  RELEASE     720
*  COMPONENT   SAP-Gateway
*  VERSION     2
*  RC          239
*  MODULE      gwdp.c
*  LINE        4686
*  DETAIL      connection to gateway on host 3.156.17.106 / 3300 broken
*  COUNTER     8954
*
*****************************************************************************

***LOG Q0R=> GwReadFromRemGw, GwRead ( GwRead-006) [gwdp.c       4713]

The temporary behaviour of problem is strange. The RFC starts working fine always once teh load is finished. No more errors in SM21 as well.

Could you please help me on this issue.

Thank You

Varun

I have just installed SAP ECC on distributed  systems ( CI and DB two nodes ) on Oracle 11G / AIX 6.1 , now with the STMS , I am getting following error ,

Please help

Message no. TP608 Diagnosis

There was an attempt to start the transport control program tp using the local RFC interface. An error occurred here.

  Error code: 3
  RFC error text: Error when opening an RFC connection (CPIC-CALL: '

Meaning of the error codes:
  03  RFC system failure
  04  RFC communication failure

System Response

The function terminates. Details about the error can be found in the trace file of the Gateway Monitor (SMGW).

Procedure

Contact your system administrator or use report RSTPTEST to localize the error. You can then execute the command again.

part of SMGW  trace is  as below ( also detail file is attached )

Tue Feb 12 15:09:45 2013
GwDpInit: attached to gw_adm at 700000000859b70

Tue Feb 12 15:10:21 2013
***LOG S23=> GwIDisconnectClient, client disconnected (001) [gwxxrd.c     10480]
***LOG S74=> GwIDisconnectClient, client disconnected ( sapk1xdb) [gwxxrd.c     10491]
***LOG S0R=> GwIDisconnectClient, client disconnected () [gwxxrd.c     10508]
***LOG S0I=> GwIDisconnectClient, client disconnected ( sapxpg) [gwxxrd.c     10521]

*****************************************************************************
*
*  LOCATION    SAP-Gateway on host sapk1xci.hrdc-drhc.net / sapgw00
*  ERROR       connection to partner 'sapk1xdb:61274' broken
*
*  TIME        Tue Feb 12 15:10:21 2013
*  RELEASE     720
*  COMPONENT   NI (network interface)
*  VERSION     40
*  RC          -6
*  MODULE      nixxi.cpp
*  LINE        4850
*  DETAIL      NiIRead: P=10.54.172.34:61274; L=10.54.172.41:3300
*  SYSTEM CALL recv
*  COUNTER     2
*
*****************************************************************************

Hi,

I have done a local client copy and it got cancelled. Below I have attached log information.

It looks like all files are copied and I have checked the file (/usr/sap/trans/log/CC09CUGU.CT1) for any error but I cant find not even a single error message.

Can you suggest where can i find the reason for client copy cancellation?

Any suggestion will be of great help.

-

Target Client                495

Source Client (incl. Auth.)  400

   Source Client User Master 400

Copy Type                    Local Copy

Profile                      SAP_ALL

Status                       Cancelled

User                         copyuser

Start on                     08.01.2012 / 00:00:56

Last Entry on                08.01.2012 / 01:59:44

Last Action:                 Post Processing        Component

-  Last Exit Program         RBDLSMAP               BC-MID-ALE

Statistics for this Run

- No. of Tables                  60101 of     60101

- Deleted Lines               20026392

- Copied Lines                20028039

Check System Log (SM21)

-

Last entry from /usr/sap/trans/log/CC09CUGU.CT1

Analysis/Generation/Deletion of condition objects during client copy

/SAPCND/CC_GROUP_WS_NG executed         0(        0) entries copied

Runtime              0 seconds

Exit program /SAPCND/CC_GROUP_WS_NG successfully executed 01:59:37

/SCMB/DF_GENERATE_CLIENT_COPY executed         0(        0) entries copied

Runtime              0 seconds

Exit program /SCMB/DF_GENERATE_CLIENT_COPY successfully executed 01:59:39

Runtime              0 seconds

Exit program BUS_SCR_CONTAINER_CLIENT_COPY successfully executed 01:59:40

EFG_FORM_CC_EXIT_AFTER executed         0(        0) entries copied

Runtime              0 seconds

Exit program EFG_FORM_CC_EXIT_AFTER successfully executed 01:59:42

Automatic postprocessing of client 495 was successful -> long text

FINB_TR_CC_EXIT_TARGET executed         0(        0) entries copied

Runtime              0 seconds

Exit program FINB_TR_CC_EXIT_TARGET successfully executed 01:59:44

I have installed ECC6 (AS ABAP) on NW2004s on Oracle, Windows platform. This is a 1-system landscape.

I would like to work hands-on with Transport Management System(TMS). I have read the theory part.

I need a document that shows how to setup a test TMS (transport route, package e.t.c.) , create a test transport, export and import the test transport in a 1-system landscape?

I'm looking for a simple test case that will help me understand TMS.

Thanks

Good morning

I'm upgrading the EA-FINSERV from 600 to 604 and this activity is like an upgrade using the same tool .

I didn't have problem during the prepare but at the end of this before downtime in phase MAIN_DTTRANS/STOPSAP_TRANS! an error occurs:

Last error code set: Process 'sapcontrol' exited with 1, see '/sapmnt/M1E/tempexp/EHPI/abap/log/SAPehpi.ECO

looking the SAPehpi.ECO i have the error:

**

EXECUTING /usr/sap/M1E/DVEBMGS48/exe/sapcontrol (/usr/sap/M1E/DVEBMGS48/exe/sapcontrol) -prot NI_HTTP -host mo1r3db -nr 48 -function StopWait 10000 10

23.03.2010 07:41:58

Stop

FAIL: NIECONN_REFUSED (Connection refused), NiRawConnect failed in plugin_fopen()

Process with ID 3913 terminated with status 1

*

Reexecuting the same program on OS Sun Solaris i have the same error:

***

sapcontrol -prot NI_HTTP -nr 48 -host mo1r3db -function StopWait 10000 10

23.03.2010 08:23:27

Stop

FAIL: NIECONN_REFUSED (Connection refused), NiRawConnect failed in plugin_fopen()

****

I don't understand why and i didn't find any solution ....the system is open now

but i can't go in downtime phase for this error. any workaround or solution? thanks

Nicola

EHP4 FOR SAP ERP 6.0 / NW7.01 on Sun Solaris

Oracle 10.2.0.4 all fixed last patches

kernel 7.01 level 81

I have change user id of sidadm and orasid, also files were changed in order to belong to new user id, but there is error
hostserver:sidadm 2> startsap

Checking Jsid Database
------------------------------
J2EE Database is running
See logfile /home/sidadm/JdbcCon.log

Starting Startup Agent sapstartsrv
-----------------------------
OK
Instance Service on host hostserver started

starting SAP Instance SCS23
------------------------------
Startup-Log is written to /home/sidadm/startsap_SCS23.log
/usr/sap/SID/SCS23/exe/sapcontrol -prot NI_HTTP -nr 23 -function Start
startup of Instance failed
See /home/sidadm/startsap_SCS23.log for details

26.07.2012 19:33:54
Start
FAIL: HTTP error, HTTP/1.1 401 Unauthorized
startup of Instance failed

Database starts withous any problem, but SAP instance no,
It is a Java System, also some links had old owner so I created again with new user, but problem stills, also the server was rebooted

Do you have any idea?

Regards

Andy

Hi All,

Here i m trying to install the ECC 6.0 SR3 (JAVA+ABAP and usage type MI, DI)  on Window 2K3 32 with Oracle 10.0.2. i am getting error

Test Logon to SAP System MDSD failed 
Solution: Make sure that the system is started, that the user DDIC exists and that the password of user DDIC is correct.

• on Step Check DDIC password when i try to logon with DDIC with password (that password which i give during installation and 19920607) then i got  SAP commit failed, session terminated.

How can i resolve it.

regards,

majamil

Dear All,

I am running the BDLS sessions in Background (excluding the known huge tables) now in my Testing System just after the system refresh activities from Production to the Testing.

The BDLS sessions run more than 22 hours (still in progress now ) , may I know where ( which tcode ) I can see the progress of the BDLS?

I've tried to check in Txcode SM50, the BGD process performing a sequential read on a table for more than 8 hours...Is it possible hang in somewhere ? May I know how to determine if the BDLS is 'hang' ?

FYI, the table size that the BDLS running on is around 140GB..

Best Regards,

Ken

Hi All,

We are facing ine issue in daily P2P load from SRM system to BW system. Many tRFCs are getting stuck red with message "Error when opening RFC connection". In SM21; we can see below error logs:

RD                                       Q0    I   Operating system call recv failed (error no. 104 )

RD                                       Q0    R Call of function GwRead failed, RC: -006

DIA  016 100 ALEREMOTE                E0  0 New System Log File Started with Number 18

DIA  016 100 ALEREMOTE                R4  9 Communication error, CPIC return code 017, SAP return code 239

DIA  016 100 ALEREMOTE                R6  4 > CPI-C function: CMINIT(SAP)

When I checked the RFC connection from SRM to BW system. It is behaving strangely. In 3,4 connections tests. It works fine. Then fails for next two with SAP gateway communication error. The local gateway is running. But sometimes it gives same error in SM58 that Local gateway not running. Below is the gateway trace

Fri Sep  7 04:14:41 2012
***LOG Q0I=> NiIRead: P=3.156.17.106:3300; L=3.156.9.64:36425: recv (104: Connection reset by peer) [nixxi.cpp 5087]
*** ERROR => NiIRead: SiRecv failed for hdl 129/sock 59
    (SI_ECONN_BROKEN/104; I4; ST; P=3.156.17.106:3300; L=3.156.9.64:36425) [nixxi.cpp    5087]

*****************************************************************************
*
*  LOCATION    SAP-Gateway on host ushaplp923la.nbcuni.ge.com / sapgw00
*  ERROR       read from SAP gateway failed
*
*  TIME        Fri Sep  7 04:14:41 2012
*  RELEASE     720
*  COMPONENT   SAP-Gateway
*  VERSION     2
*  RC          239
*  MODULE      gwdp.c
*  LINE        4686
*  DETAIL      connection to gateway on host 3.156.17.106 / 3300 broken
*  COUNTER     8954
*
*****************************************************************************

***LOG Q0R=> GwReadFromRemGw, GwRead ( GwRead-006) [gwdp.c       4713]

The temporary behaviour of problem is strange. The RFC starts working fine always once teh load is finished. No more errors in SM21 as well.

Could you please help me on this issue.

Thank You

Varun